SNES Style Multi-Out Connector For NESRGB
$10.00 – $15.00
Give your NESRGB mod the connector is deserves with our Resin printed push-in style Multi-Out connector.
Description
This Resin printed push-in connector will let you connect a SNES style Multi-out cable to your NESRGB modded Nintendo NES. We’ve designed this connector with special tabs that grab the NES case when pushed into place. No glue or screws needed.
- The connector was designed to work with DB-Electronics’ SNES-AV PCB, which can be purchased directly from me or from OSH Park.
- Because this item is printed on demand, please allow 48hrs of lead time
- Resin prints are strong but can break under certain circumstances. We are not responsible for any damage to the connector during installation.
- This connector does not come with the NESRGB only what is shown in the pictures and options you’ve selected!
- Each order comes with a 3D printed cut guide
- An M3x8mm screw is needed to secure the PCB to the socket. Alternatively, an M2.5×10-12mm and nut should also do the trick. Screw only included with “Multi-Out + AV PCB” option.
Additional information
| Weight | .4 oz |
|---|---|
| Dimensions | 2 × 1 × .75 in |
| Options | Multi-Out Socket, Multi-Out + Template, Multi-Out + AV PCB, Multi-Out + AV PCB + Template |